Configure FPGA.
Syntax
fpga <bitstream-file>Configure FPGA with given bitstream.
fpga [options]Configure FPGA with bitstream specified options, or read FPGA state.
Options
| Option | Description |
|---|---|
-file <bitstream-file>
|
Specify file containing bitstream. |
-partial
|
Configure FPGA without first clearing the current configuration. This option should be used while configuring partial bitstreams created before 2014.3 or any partial bitstreams in binary format. |
-no-revision-check
|
Disable bitstream versus silicon revision revision compatibility check. |
-skip-compatibility-check
|
Disable bitstream versus FPGA device compatibility check. |
-state
|
Return whether the FPGA is configured. |
-config-status
|
Return configuration status. |
-ir-status
|
Return IR capture status. |
-boot-status
|
Return boot history status. |
-timer-status
|
Return watchdog timer status. |
-cor0-status
|
Return configuration option 0 status. |
-cor1-status
|
Return configuration option 1 status. |
-wbstar-status
|
Return warm boot start address status. |
Note(s)
- If no target is selected or if the current target is not a supported FPGA device, and only one supported FPGA device is found in the targets list, this device will be configured.
Returns
Depends on options used.
-file, -partial: Nothing, if FPGA is configured, or an error if the configuration failed.
One of the other options Configuration value.