To synthesize the FiveTuple example design in Vivado Design Suite after compiling it, (as described in the Compile an Example Design and Run a Simulation section), complete the following steps:
- Click Run Synthesis under SYNTHESIS in the panel on the left. Click OK in the Launch Runs window that
appears.
- After completion of synthesis, run implementation by selecting Run implementation in the Synthesis
Completed window.
- To view implementation results select Open Implemented Design in the Implementation Completed window.
- A bitstream can be created with an appropriate top-level wrapper file and a .xdc file containing pin-out constraints. The system can be run on any board with a supported device. Note other IP such as a 100G MAC are normally required to get the system up and running on a board.