The following table summarizes the available components that can be targeted with this command:
| Component | Equivalent Bitbake Commands | Description |
|---|---|---|
| bootloader |
bitbake
virtual/fsbl
|
Build only the boot loader elf image and copy it into <plnx-proj-root>/images/linux/. For Zynq® UltraScale+™ MPSoC and Zynq-7000 devices, it is FSBL and for MicroBlaze™ processor, it is fs-boot. |
| device tree |
bitbake
virtual/dtb
|
Build only the device tree DTB file and copy it into <plnx-proj-root>/images/linux/. The device tree source is in <plnx-proj-root>/components/plnx_workspace/device-tree/device-tree/. |
| arm-trusted-firmware |
bitbake
virtual/arm-trusted-firmware
|
Build only the TF-A image and copy it into <plnx-proj-root>/images/linux. |
| pmufw |
bitbake
virtual/pmufw
|
Build only the PMU firmware image and copy it into <plnx-proj-root>/images/linux. |
| kernel |
bitbake
virtual/kernel
|
Build only the Linux kernel image and copy it into <plnx-proj-root>/images/linux. |
| rootfs |
bitbake
petalinux-user-image -c do_image_complete
|
Build only the root file system. It generates the target rootfs in ${TMPDIR}/work/${MACHINE}/petalinux-user-image/1.0-r0/rootfs/ and the sysroot in ${TMPDIR}/tmp/sysroots/${MACHINE}. |
| u-boot |
bitbake
virtual/bootloader
|
Build only the U-Boot elf image and copy it into <plnx-proj-root>/images/linux. |
| plm |
virtual/plm
|
Build only the PLM image and copy it into <plnx-proj-root>/images/linux. |
| psmfw |
virtual/psm-firmware
|
Build only the PSM firmware image and copy it into <plnx-proj-root>/image/linux. |
| image selector | imgsel | Build only the Image Selector firmware image and copy it into <plnx-proj-root>/image/linux. |