Unsupported Features - 2022.2 English

Xilinx Standalone Library Documentation: BSP and Libraries Document Collection (UG643)

Document ID
UG643
Release Date
2022-10-19
Version
2022.2 English

The following features are not supported by the XilSEM library:

The following features are not supported by the XilSEM library:

  • The XilSEM library does not operate on soft errors outside of the configuration RAM and NPI Registers. Soft error mitigation in other device resources, if necessary, based on design requirements, must be addressed at the user design level through measures such as redundancy or error detection and correction codes.
  • The XilSEM library initializes and manages the integrated silicon features for soft error mitigation and when included in a design, do not modify settings of associated features in the PMC.
  • Design simulations that include the XilSEM library are supported. However, it is not possible to observe the library and integrated silicon features in simulation. Hardware-based evaluation is required.
  • The XilSEM library is not explicitly designed for use under high irradiation environments, including but not limited to the space or artificially generated environments. Therefore, Xilinx offers only limited guidance specific to the application of the XilSEM library in such environments.
  • Debug prints are not enabled in the XilSEM library. For debug information, use the XSem_CmdCfrGetStatus and XSem_CmdNpiGetStatus. See XilSEM Library Versal Client APIs for more information. You will be notified via optional IPI and GPO. For more information, see Listening for SEU Detection.
  • XilSEM support for SSIT with DFX designs is not available.

The XilSEM library is delivered pre-compiled as a pre-verified solution; source code is not provided. User modification of the XilSEM library is not supported.