Mixer - 2022.1 English

Library

Description

This block implements the Mixer targeted for AI Engines.

Parameters

Input/Output data type

Describes the type of individual data samples input to and output from the Mixer function. It should only be cint16.

Input window size (Number of samples)

Specifies the number of samples in the input window. The value must be in the range 16 to 4096. Default value is 32.

Mixer mode

This specifies the mixer operation modes. Two modes are supported by Mixer function:

Single Input Mode

This is a DDS plus Mixer for a single data input port. Each data input sample is complex multiplied with the corresponding DDS sample to create a modulated signal that is written to the output window. This is the default Mixer mode.

Dual Input Mode

This is a special configuration for symmetrical carriers and two data input ports. Each data sample of the first input is complex multiplied with the corresponding DDS sample to create a modulated signal. Each data sample of the second data input is complex multiplied with the conjugate (which is equivalent to a signal rotating in the opposite direction) of the DDS sample to create a second modulated signal. These two modulated signals are added together and written to the output window.

Phase increment

This specifies the phase increment between the samples. The value should be in the range 0 to 2^31.

Phase increment is calculated using the formula (Fo*(2^N ))/ Fs)

Where:

• Fo = Output frequency
• N = 32, which represents the accumulator width, and it is fixed
• Fs = Sampling frequency

Target input throughput (MSPS)

Specifies the input sampling rate of the function in Mega Samples per Second (MSPS). The value must be in the range 1 to 1000 and the default value is 200.