JTAG Status and Error Status - 2022.1 English

Versal ACAP System Integration and Validation Methodology Guide (UG1388)

Document ID
UG1388
Release Date
2022-05-25
Version
2022.1 English

You can capture the overall PMC status and error status using the jtag_status and error_status commands from XSCT.

xsct% device status jtag_status
  • Check BOOT_MODE [15:12] bits
  • Check DONE [34] bit – This indicates configurations completed
  • Ensure the voltages supplies are detected successfully – Bits [8:11] should be asserted
xsct% device status error_status
  • Expected error_status value is 0x0 after board is power cycled and Power-on reset (POR) is asserted
Table 1. JTAG_STATUS Register Format
Bit Field Description
35 RESERVED Reserved
34 DONE Boot and configuration status indicator

A value of 1 on DONE indicates boot and configuration is complete

33 JRDBK ERROR JTAG readback status indicator

A value of 1 on JRDBK indicates an error reading data from SBI

32 JCONFIG ERROR JTAG data load error indicator

A value of 1 means the SBI is not ready to accept data

31:28 PMC VERSION PMC version
27:24 RESERVED Reserved
23 JTAG SEC GATE Security gate status

A value of 1 means DAP AXI transactions are allowed

22 RESERVED Reserved
21 PMC SCAN CLEAR DONE Scan clear done indication

A value of 1 means the scan clear is complete

20 PMC SCAN CLEAR PASS Scan clear pass indication

A value of 1 means the scan clear passed

19:16 RESERVED Reserved
15:12 BOOT MODE [3:0] Boot mode value captured from the MODE pins at release of POR_B
11 VCC_PMC DETECTED VCC_PMC supply detected
10 VCC_PSLP DETECTED VCC_PSLP supply detected
9 VCCINT DETECTED VCCINT supply detected
8 VCC_SOC DETECTED VCC_SOC supply detected
7 AES KEY ZEROIZED AES key zeroized indicator

A value of 1 indicates all keys are zeroized

6 BBRAM KEY ZEROIZED BBRAM key zeroized indicator

A value of 1 indicates that the BBRAM key is zeroized

[5:4] SELECTMAP BUS WIDTH SelectMAP boot mode bus width detected

00 = No bus width detected

01 = SelectMAP 8-bit

10 = SelectMAP 16-bit

11 = SelectMAP 32-bit

3 SBI JTAG ENABLED SBI JTAG indicator

A value of 1 indicates the SBI is configured to receive data from the JTAG interface

2 SBI JTAG BUSY SBI JTAG BUSY indicator

A value of 1 indicates the SBI is BUSY and cannot accept data when in JTAG mode

1 RSVD_READS_0 Reserved, returns 0
0 RSVD_READS_1 Reserved, returns 1
Table 2. ERROR_STATUS Register Format
Bit Field Description
159:155 RSVD_READS_0 Reserved, returns 0
154:148 RESERVED Reserved
147:136 BOOTROM FIRST ERROR BootROM first error code (FEC) detected
135:124 BOOTROM LAST ERROR BootROM last error code (LEC) detected
123:110 PLM MAJOR ERROR PLM major error code
109:94 PLM MINOR ERROR PLM minor error code
93:64 GSW ERROR General software error code for PLM
63 RESERVED Reserved
62 BOOTROM NCR BootROM non-correctable error

Set by RCU BootROM during boot

61 PLM CR Platform loader and manager boot correctable error

Set by PLM during boot

60 PLM NCR Platform loader and manager boot non-correctable error

Set by PLM during boot

59 GSW CR General software correctable error after boot
58 GSW NCR General software non-correctable error after boot
57 CFU ERROR CFU error
56 CFRAME ERROR CFRAME error
55 PSM CR PSM correctable error
54 PSM NCR PSM non-correctable error
53 DDRMC MB CR DDRMC MicroBlaze correctable ECC error
52 DDRMC MB NCR DDRMC MicroBlaze non-correctable ECC error
51 NOC CR NoC correctable error
50 NOC NCR NoC non-correctable error
49 NOC USER ERROR NoC user error
48 MMCM LOCK ERROR MMCM lock error
47 AIE CR AI Engine correctable error
46 AIE NCR AI Engine non-correctable error
45 DDRMC MC ECC CR DDRMC MC (memory controller) correctable ECC error
44 DDRMC MC ECC NCR DDRMC MC (memory controller) non-correctable ECC error
43 GT CR GT correctable error
42 GT NCR GT non-correctable error
41 SYSMON CR SYSMON correctable error
40 SYSMON NCR SYSMON non-correctable error
39 USER PL0 ERROR User-defined PL error
38 USER PL1 ERROR User-defined PL error
37 USER PL2 ERROR User-defined PL error
36 USER PL3 ERROR User-defined PL error
35 NPI ROOT ERROR NPI root error
34 SSIT ERROR3 SSI technology SLR error
33 SSIT ERROR4 SSI technology SLR error
32 SSIT ERROR5 SSI technology SLR error
31 PMC APB ERROR PMC APB error. Includes errors from registers: PMC_LOCAL, PMC_GLOBAL, CRP, PMC_IOP_SECURE_SLCR, PMC_IOP, BBRAM_CTRL, PMC_ANLG, RTC
30 PMC BOOTROM ERROR PMC BootROM validation error
29 RCU HARDWARE ERROR RCU hardware error
28 PPU HARDWARE ERROR PPU hardware error
27 PMC PAR ERROR PMC switch and PMC IOP parity errors
26 PMC CR PMC correctable errors
25 PMC NCR PMC non-correctable errors
24 PMC SYSMON0 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
23 PMC SYSMON1 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
22 PMC SYSMON2 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
21 PMC SYSMON3 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
20 PMC SYSMON4 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
19 PMC SYSMON5 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
18 PMC SYSMON6 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
17 PMC SYSMON7 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
16 PMC SYSMON8 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
15 PMC SYSMON9 ALARM PMC temperature shutdown alert and power supply failure detection errors from SYSMON
14 CFI NCR CFI non-correctable error
13 SEU CRC ERROR SEU CRC error
12 SEU ECC ERROR SEU ECC error
11:10 RSVD_READS_0 Reserved, returns 0
9 RTC ALARM RTC alarm error
8 NPLL ERROR PMC NPLL lock error
7 PPLL ERROR PMC PPLL lock error
6 CLOCK MONITOR ERROR Clock monitor errors
5 PMC TIMEOUT ERROR PMC interconnect timeout errors from interconnect mission interrupt status register, interconnect latent status register, and timeout interrupt status register
4 PMC XMPU ERROR PMC XMPU errors from register access error on APB. Includes read permission violation, write permission violation or security violation
3 PMC XPPU ERROR PMC XPPU errors from register access error on APB. Includes Master ID not found, read permission violation, Master ID access violation, Master ID parity error, TrustZone violation
2 SSIT ERROR0 SSI technology SLR error
1 SSIT ERROR1 SSI technology SLR error
0 SSIT ERROR2 SSI technology SLR error