The Other Path Groups section of the Timing Summary Report displays default path groups and user-defined path groups. The following figure shows an example of the Other Path Groups summary table. To access this table, select Other Path Groups in the left pane.
Figure 1. Timing Summary Report: Path Groups Section
Tip:
**async_default** is a path group automatically created by the
Vivado IDE timing engine. It includes all paths ending with an
asynchronous timing check, such as recovery and removal. These two checks are
respectively reported under SETUP and HOLD categories, which corresponds to max delay
analysis and min delay analysis. Any groups you create using
group_path
appear in this section as well. Any combination of source and destination clocks can be
present in a path group.