Command Line Only Options - 2021.2 English

The following timing options are only available from the Tcl command line and can be used with the -name option to generate a GUI report.

csv <filename>.csv

Generates a CSV file with timing path options. This can be useful when sorting through a large number of paths.

-routed_vs_estimated

This option reports the estimated versus actual routed delays side-by-side for the same path. Some fields within the Timing Category in the report are prefaced with "Estimated" or "Routed" for comparison.

-return_timing_paths

Returns timing path objects to enable the further analysis of paths of specific logic levels within a specified clock domain. Must be used with both the -end_point_clock and -logic_levels options.

-end_point_clock

Used to limit the logic level distribution report section to the timing paths with the specified end point clock.

-logic_levels

Can limit the report to the specified logic levels. Can be a single logic level or a range.

The following complexity options are only available from the command line and can be used with the -name option to generate a GUI report.

-bounding_boxes <arg>

This option performs the complexity analysis of the specified bounding boxes. For example:

-bounding_boxes { "CLE_M_X21Y239:CLEL_R_X28Y254" "CLEL_R_X18Y171:CLE_M_X26Y186" }

Note: A space is required between the open bracket `{` and the start of the bounding box, as shown in the previous example.