This option is used to perform various optimizations on DSP slice pipeline, input and output registers to improve timing within and to and from the DSP slices. The table below lists the available optimization.
Note: Not applicable to Versal.
Optimization Type | Configuration Required to Trigger | Post Optimization State | Timing Requirement |
---|---|---|---|
MREG to PREG | MREG=1, PREG=0 | MREG=0, PREG=1 | Timing from MREG is critical (slack less than 0.5 ns), and timing to MREG is not critical (slack greater than 1 ns) |
PREG to MREG | MREG=0, PREG=1 | MREG=1, PREG=0 | Timing to PREG is critical (slack less than 0.5 ns), and timing from PREG is not critical (slack greater than 1 ns). |
MREG to ADREG | ADREG=0, MREG=1 | ADREG=1, MREG=0 | Timing to MREG is critical (slack less than 0.5 ns), and timing from MREG is not critical (slack greater than 1 ns) |
ADREG to MREG | ADREG=1, MREG=0 | ADREG=0, MREG=1 | Timing from ADREG is critical (slack less than 0.5 ns), and timing to ADREG is not critical (slack greater than 1 ns) |
AREG/BREG push out to fabric | AREG=1/2, BREG=1/2 |
AREG=0/1, BREG=0/1, FDRE in fabric |
Timing to AREG/BREG is critical (slack less than 0.5 ns), and timing from AREG/BREG is not critical (slack greater than 1 ns) |
AREG/BREG pull in from fabric |
AREG=0/1, BREG=0/1, FDRE in fabric |
AREG=1/2, BREG=1/2 | Timing to DSP input is critical (slack less than 0.5 ns) |
AREG and BREG to MREG |
AREG=1/2, BREG=1/2, MREG=0 | AREG=0/1, BREG=0/1, MREG=1 | Timing from AREG/BREG is critical (slack less than 0.5 ns), and timing to AREG/BREG is not critical (slack greater than 1 ns) |
MREG to AREG and BREG |
AREG=0, BREG=0, MREG=1 | AREG=1, BREG=1, MREG=0 | Timing to MREG is critical (slack less than 0.5 ns), and timing from MREG is not critical (slack greater than 1 ns) |
PREG push out to fabric | PREG=1 | PREG=0, FDRE in fabric | Timing from PREG is critical (slack less than 0.5 ns), and timing to PREG is not critical (slack greater than 1 ns) |
PREG pull in from fabric | PREG=0, FDRE in fabric | PREG=1 | Timing from DSP output is critical (slack less than 0.5 ns) |