Note: The project file discussed here is a Vivado simulator text-based project file. It is not the same as the project file (.xpr) created by the Vivado Design Suite.
To parse design files using a project file, create a text file called <proj_name>.prj, and use the syntax shown below inside the project file.
verilog <work_library> <file_names>... [-d <macro>]...[-i <include_path>]...
vhdl <work_library> <file_name>
sv <work_library> <file_name>
vhdl2008 <work_library> <file_name>
Where:
<work_library>
: Is the library into which the HDL files on the given line are to be compiled.
<file_names>
: Are Verilog source files. You can specify multiple Verilog files per line.
<file_name>
: Is a VHDL source file; specify only one VHDL file per line.
- For Verilog or SystemVerilog:
[-d <macro>]
provides you the option to define one or more macros. - For Verilog or SystemVerilog:
[-i <include_path>]
provides you the option to define one or more<include_path>
directories.