You can suppress messages from appearing in the Vivado IDE Messages window as follows:
- To suppress a specific message, right-click the message, and select Suppress this Message.
- To suppress all messages with a specific message ID, right-click the message, and select Suppress Messages with this ID.
- To suppress all messages of a specific severity (for example, Info), right-click a message, and select Suppress Messages with this Severity.
- To suppress a message that contains a specific text string or collection of strings,
right-click in the Messages window, and select Manage
Suppression. In the Manage Suppression dialog box (shown in the
following figure), click the add button
. In the New Suppression Rule dialog box, enter the
message ID or text string to add the suppression rule, and click
OK.
Tip: To limit the number of messages without suppressing them, you can use the
set_msg_config Tcl command, for example, set_msg_config -id
{[Common 17-349]} -limit 10. The default message limit is 100. For more
information, see
set_msg_config
in the
Vivado
Design Suite Tcl Command Reference Guide (UG835).Figure 1. Manage Suppression Dialog Box
