Syntax
userkeys = <filename>
File Format
user_key0 <userkey0 value>
user_key1 <userkey1 value>
user_key2 <userkey2 value>
user_key3 <userkey3 value>
user_key4 <userkey4 value>
user_key5 <userkey5 value>
user_key6 <userkey6 value>
user_key7 <userkey7 value>
Description
The path to the user keyfile. The keyfile contains user keys used to encrypt the partitions. The size of user key can be 128 or 256 bits. The 128-bit key can be used only for run-time loaded partitions.
Example
In the following example, FPD partition uses the key source as
user_key2
, so the .nky file for this
partition must have the user_key2
from the
userkeys file as the key0
. This
key0
from the .nky file is then used by
Bootgen for encryption. The PLM uses the user_key2
programmed by
pmc_data
during decryption.
new_bif:
{
userkeys = userkeyfile.txt
id_code = 0x14ca8093
extended_id_code = 0x01
id = 0x2
image
{
name = pmc_subsys
id = 0x1c000001
partition
{
id = 0x01
type = bootloader
encryption = aes
keysrc=bbram_red_key
aeskeyfile = inputs/keys/enc/bbram_red_key.nky
dpacm_enable
file = gen_files/plm.elf
}
partition
{
id = 0x09
type = pmcdata, load = 0xf2000000
file = static_files/topology_xcvc1902.v3.cdo
file = gen_files/pmc_data.cdo
}
}
image
{
name = lpd
id = 0x4210002
partition
{
id = 0x0C
type = cdo
file = gen_files/lpd_data.cdo
}
partition
{
id = 0x0B
core = psm
file = static_files/psm_fw.elf
}
}
image
{
name = pl_cfi
id = 0x18700000
partition
{
id = 0x03
type = cdo
file = design_1_wrapper.rcdo
}
partition
{
id = 0x05
type = cdo
file = design_1_wrapper.rnpi
}
}
image
{
name = fpd
id = 0x420c003
partition
{
id = 0x08
type = cdo
file = gen_files/fpd_data.cdo
encryption = aes
keysrc=user_key2
aeskeyfile = userkey2.nky
}
}
image
{
name = ss_apu
id = 0x1c000000
partition
{
id = 0x61
core = a72-0
file = ./wrk_a72_r5/perip_a72/Debug/perip_a72.elf
}
}
}