System Throughput
The following table shows memory controller performance for running a 4kp60, 4:2:2, 10-bit decode-display pipeline. These throughput numbers are based on x8 configuration of the controller at 2133 DRAM speed.
| Bandwidth | Decoder port 0 | Decoder port 1 | Display | Video traffic generator in PL |
|---|---|---|---|---|
| Read bandwidth | 1879.78 MB/s | 1913.62 MB/s | 1328.09 MB/s | 950.72 MB/s |
| Write bandwidth | 895.32 MB/s | 792.01 MB/s | N/A | N/A |
The following table summarizes performance in decoded images/sec for decoding a 4kp60 video stream, 4:2:2, 10-bit, using four B-frames.
| Speed | Frame-rate Decode Only | Frame-rate Decode + Display |
|---|---|---|
| X8 | 93 frames/sec | 74 frames/sec |
| X16 | 89 frames/sec | 70 frames/sec |
VCU DDR4 Controller Latency
Note: These numbers do not include
the latency information from the interconnect in the fabric. For more information,
see the
UltraScale
Architecture-Based FPGAs Memory IP LogiCORE IP Product Guide
(PG150).
Latency number for the access times in "VCU DDR4 Controller" is 130 ns on SODIMM MTA8ATF51264HZ-2G6B1 @ 2400.