Connect to the JupyterLab Server - Connect to the JupyterLab Server - 2021.1 English - XD336

Follow these steps to boot the board into Linux

• Ensure all steps under the section Board Setup are verified.

• Insert the prepared micro SD card into the Versal SD card slot (refer to the image in Board Setup)

• Have the UART0 terminal emulator tab connected.

• Turn ON power switch SW13.

• On Versal UART0 terminal, you would see the Versal device booting from the micro SD card, starting with the message “Xilinx Versal Platform Loader and Manager”

• In about 60 seconds boot is complete. Observe the Linux prompt root@xilinx-vck190-2021_1 and autostart of JupyterLab server as shown in the example below:

  root@xilinx-vck190-2021_1:~#
  [I 17:36:24.640 LabApp] Writing notebook server cookie secret to /home/root/.local/share/jupyter/runtime/notebook_cookie_secret
  [W 17:36:26.084 LabApp] JupyterLab server extension not enabled, manually loading...
  [I 17:44:03.942 LabApp] JupyterLab extension loaded from /usr/lib/python3.7/site-packages/jupyterlab
  [I 17:44:03.942 LabApp] JupyterLab application directory is /usr/share/jupyter/lab
  [I 17:44:06.924 LabApp] Serving notebooks from local directory: /usr/share/notebooks
  [I 17:44:06.924 LabApp] The Jupyter Notebook is running at:
  [I 17:44:06.925 LabApp] http://xxx.xxx.x.xx:8888/?token=06cfb958c61eb0581bb759f40e3a4c3a6252cef3b7075449
  [I 17:44:06.925 LabApp]  or http://127.0.0.1:8888/?token=06cfb958c61eb0581bb759f40e3a4c3a6252cef3b7075449
  [I 17:44:06.925 LabApp] Use Control-C to stop this server and shut down all kernels (twice to skip confirmation).
  [C 17:44:06.949 LabApp]
  
      To access the notebook, open this file in a browser:
          file:///home/root/.local/share/jupyter/runtime/nbserver-658-open.html
      Or copy and paste one of these URLs:
          http://xxx.xxx.x.xx:8888/?token=06cfb958c61eb0581bb759f40e3a4c3a6252cef3b7075449
       or http://127.0.0.1:8888/?token=06cfb958c61eb0581bb759f40e3a4c3a6252cef3b7075449