The Global Clock Resources table shows a summary for each clock net with important constraints and placement information, as shown in the following figure.
Figure 1. Report Clock Utilization – Global Clock Resources Table
The columns in the Global Clock Resources table are listed in the following table.
| Column | Description |
|---|---|
| Global Id | Unique global clock net ID |
| Source Id | ID of the clock generating primitive connected to the clock buffer |
| Driver Type/Pin | Primitive pin connected to the clock net |
| Constraint |
User physical constraint with highest precedence applied to the clock buffer. Priority rule is as follows:
|
| Site | Clock buffer location set by the user or by the Vivado implementation tools. |
| Clock Region |
Device clock region where the buffer is located. Does not apply to 7 series. |
| Root |
Clock region where the clock net Does not apply to 7 series. |
| Clock Delay Group |
Name of the group of clock nets specified by the user to force routing matching by the Vivado® implementation tools. Does not apply to 7 series. |
| Load Clock Region | Number of clock regions where clock net loads are located. |
| Clock Loads | Number of clock pin loads. |
| Non-Clock Loads | Number of non-clock pin loads, such as FDCE/CE pins for example. |
| Clock Period | Period in ns of the timing clock which propagates on the clock net. If several clocks propagate on the same clock net, the smallest clock period is reported. |
| Clock | Name of the timing clock which propagates on the clock net. If several clocks propagate on the same clock net, "Multiple" is reported. |
| Driver Pin | Logical name of the clock net driver pin. |
| Net | Logical name of the clock net segment connected to the clock driver pin. |