Example SAIF Tcl Commands - 2021.1 English

Example SAIF Tcl Commands - 2021.1 English - UG900

Vivado Design Suite User Guide: Logic Simulation (UG900)

Document ID

UG900

Release Date

2021-06-16

Version

2021.1 English

To log SAIF for:

All signals in the scope: /tb: log_saif /tb/*
All the ports of the scope: /tb/UUT
Those objects having names that start with a and end in b and have digits in between:
```
log_saif [get_objects -regexp {^a[0-9]+b$}]
```
The objects in the current_scope and children_scope:
```
log_saif [get_objects -r *]
```
The objects in the current_scope:
```
log_saif * or log_saif [get_objects]
```

Only the ports of the scope /tb/UUT, use the command:

id="ah453025">log_saif [get_objects -filter {type == in_port || type == out_port || type == 
inout_port || type == port } /tb/UUT/* ]

Only the internal signals of the scope /tb/UUT, use the command:
```
log_saif [get_objects -filter { type == signal } /tb/UUT/* ] 
```
Tip: This filtering is applicable to all Tcl commands that require HDL objects.