XPM_CDC_SYNC_RST - 2021.1 English

Versal Architecture AI Core Series Libraries Guide (UG1353)

Document ID
UG1353
Release Date
2021-06-16
Version
2021.1 English

Parameterized Macro: Synchronous Reset Synchronizer

  • MACRO_GROUP: XPM
  • MACRO_SUBGROUP: XPM_CDC

Introduction

This macro synchronizes a reset singal to the destination clock domain. Unlike the XPM_CDC_ASYNC_RST macro, the generated output will both assert and deassert synchronously to the destination clock domain.

For proper operation, the input data must be sampled two or more times by the destination clock. You can define the number of register stages used in the synchronizers and the initial value of these registers after configuration. You can also enable a simulation feature to generate messages which report any potential misuse of the macro.

Port Descriptions

Port Direction Width Domain Sense Handling if Unused Function
dest_clk Input 1 NA EDGE_RISING Active Destination clock.
dest_rst Output 1 dest_clk NA Active src_rst synchronized to the destination clock domain. This output is registered.
src_rst Input 1 NA NA Active Source reset signal.

Design Entry Method

Instantiation Yes
Inference No
IP and IP Integrator Catalog No

Available Attributes

Attribute Type Allowed Values Default Description
DEST_SYNC_FF DECIMAL 2 to 10 4 Number of register stages used to synchronize signal in the destination clock domain.
INIT DECIMAL 1, 0 1

0- Initializes synchronization registers to 0

1- Initializes synchronization registers to 1

The option to initialize the synchronization registers means that there is no complete x-propagation behavior modeled in this macro. For complete x-propagation modelling, use the xpm_cdc_single macro.

INIT_SYNC_FF DECIMAL 0, 1 0

0- Disable behavioral simulation initialization value(s) on synchronization registers.

1- Enable behavioral simulation initialization value(s) on synchronization registers.

SIM_ASSERT_CHK DECIMAL 0, 1 0

0- Disable simulation message reporting. Messages related to potential misuse will not be reported.

1- Enable simulation message reporting. Messages related to potential misuse will be reported.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library xpm;
use xpm.vcomponents.all;

-- xpm_cdc_sync_rst: Synchronous Reset Synchronizer
-- Xilinx Parameterized Macro, version 2021.1

xpm_cdc_sync_rst_inst : xpm_cdc_sync_rst
generic map (
   DEST_SYNC_FF => 4,   -- DECIMAL; range: 2-10
   INIT => 1,           -- DECIMAL; 0=initialize synchronization registers to 0, 1=initialize
                        -- synchronization registers to 1
   INIT_SYNC_FF => 0,   -- DECIMAL; 0=disable simulation init values, 1=enable simulation init values
   SIM_ASSERT_CHK => 0  -- DECIMAL; 0=disable simulation messages, 1=enable simulation messages
)
port map (
   dest_rst => dest_rst, -- 1-bit output: src_rst synchronized to the destination clock domain. This output
                         -- is registered.

   dest_clk => dest_clk, -- 1-bit input: Destination clock.
   src_rst => src_rst    -- 1-bit input: Source reset signal.
);

-- End of xpm_cdc_sync_rst_inst instantiation

Verilog Instantiation Template


// xpm_cdc_sync_rst: Synchronous Reset Synchronizer
// Xilinx Parameterized Macro, version 2021.1

xpm_cdc_sync_rst #(
   .DEST_SYNC_FF(4),   // DECIMAL; range: 2-10
   .INIT(1),           // DECIMAL; 0=initialize synchronization registers to 0, 1=initialize synchronization
                       // registers to 1
   .INIT_SYNC_FF(0),   // DECIMAL; 0=disable simulation init values, 1=enable simulation init values
   .SIM_ASSERT_CHK(0)  // DECIMAL; 0=disable simulation messages, 1=enable simulation messages
)
xpm_cdc_sync_rst_inst (
   .dest_rst(dest_rst), // 1-bit output: src_rst synchronized to the destination clock domain. This output
                        // is registered.

   .dest_clk(dest_clk), // 1-bit input: Destination clock.
   .src_rst(src_rst)    // 1-bit input: Source reset signal.
);

// End of xpm_cdc_sync_rst_inst instantiation

Related Information