OR2L - 2021.1 English

Versal Architecture AI Core Series Libraries Guide (UG1353)

Document ID
UG1353
Release Date
2021-06-16
Version
2021.1 English

Primitive: Two input OR gate implemented in place of a CLB Latch

  • PRIMITIVE_GROUP: CLB
  • PRIMITIVE_SUBGROUP: LATCH

Introduction

This element allows the specification of a configurable CLB latch to take the function of a two input OR gate. The use of this element can reduce logic levels and increase logic density of the part by trading off register/latch resources for logic. Xilinx suggests caution when using this component as it can affect register packing and density within a CLB.

Logic Table

Inputs Outputs
DI SRI O
0 0 0
0 1 1
1 0 1
1 1 1

Port Descriptions

Port Direction Width Function
DI Input 1 Active-High input that is generally connected to sourcing LUT located in the same CLB.
O Output 1 Output of the OR gate.
SRI Input 1 Input that is generally sourced from outside of the CLB. The attribute IS_SRI_INVERTED determines the active polarity of this signal.
Note: To allow more than one AND2B1L or OR2L to be packed into a half CLB, a common signal must be connected to this input.

Design Entry Method

Instantiation Yes
Inference No
IP and IP Integrator Catalog No

Available Attributes

Attribute Type Allowed Values Default Description
IS_SRI_INVERTED BINARY 1'b0 to 1'b1 1'b0 Specifies whether or not to use the optional inversion for the SRI pin of this component.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- OR2L: Two input OR gate implemented in place of a CLB Latch
--       Versal AI Core series
-- Xilinx HDL Language Template, version 2021.1

OR2L_inst : OR2L
generic map (
   IS_SRI_INVERTED => '0'  -- Optional inversion for SRI
)
port map (
   O => O,     -- 1-bit output: OR gate output
   DI => DI,   -- 1-bit input: Data input connected to LUT logic
   SRI => SRI  -- 1-bit input: External CLB data
);

-- End of OR2L_inst instantiation

Verilog Instantiation Template


// OR2L: Two input OR gate implemented in place of a CLB Latch
//       Versal AI Core series
// Xilinx HDL Language Template, version 2021.1

OR2L #(
   .IS_SRI_INVERTED(1'b0)  // Optional inversion for SRI
)
OR2L_inst (
   .O(O),     // 1-bit output: OR gate output
   .DI(DI),   // 1-bit input: Data input connected to LUT logic
   .SRI(SRI)  // 1-bit input: External CLB data
);

// End of OR2L_inst instantiation

Related Information

  • Versal ACAP Configurable Logic Block Architecture Manual (AM005)