After editing your configuration file to reflect your installation preferences, you can run the installer. As part of the command line installer, you must indicate your acceptance of the Xilinx End-User License Agreement and Third Party End-User License Agreement, and confirm you understand the WebTalk Terms and Conditions.
WebTalk Terms and Conditions
The WebTalk Terms and Conditions, which you must agree to when running the installer, is below:
By indicating I Agree, I also confirm that I have read Section 13 of the terms and conditions above concerning WebTalk and have been afforded the opportunity to read the WebTalk FAQ posted at https://www.xilinx.com/webtalk. I understand that I am able to disable WebTalk later if certain criteria described in Section 13(c) apply. If they don't apply, I can disable WebTalk by uninstalling the Software or using the Software on a machine not connected to the Internet. If I fail to satisfy the applicable criteria or if I fail to take the applicable steps to prevent such transmission of information, I agree to allow Xilinx to collect the information described in Section 13(a) for the purposes described in Section 13(b).
When using the command line, use the command-line switch, -a or --agree, to indicate your
agreement to each of the above. If one of the above is left out of the list, or the agree
switch is not specified, the installer exits with an error and does not install.
Batch Mode Installation Using Single-File Download
xsetup --agree XilinxEULA,3rdPartyEULA,WebTalkTerms
--batch Install --config install_config.txt
--config option, but since the destination directory is included in the
configuration file, you will be required to specify this on the command
line.xsetup --agree 3rdPartyEULA,WebTalkTerms,XilinxEULA
--batch Install --edition "Vitis Unified Software Platform" --location "/home/Xilinx"
The above command uses the default configuration options for the edition
specified. To see the default configuration options, use the –b
ConfigGen mode as described above. The batch mode of the installer can also
uninstall and upgrade (add additional tools and devices). For the full list of the options
in the installer batch mode, run xsetup -h or xsetup --help.