Options | Functional Description | Value Range | Default Value |
---|---|---|---|
-w, --wks <WKS_FILE>
|
Specify the wic file to be used to create partitions of SD card. | None | None |
-o, --outdir <OUTPUT_DIR>
|
Specify the output directory to create petalinux-sdimage.wic. | None | Default: <proot>/images/linux. |
-i, --images-dir <IMAGES_DIR>
|
Specify the images directory the boot files were located. | None | Default: <proot>/images/linux. |
-c, --rootfs-file <ROOTFS_FILE>
|
Specify the compressed root filesystem file that will be extracted into the /rootfs directory. | None | Default:
<proot>/images/linux/rootfs.tar.gz
Supports only the tar.gz format. |
-r, --rootfs-dir <ROOTFS_DIR>
|
Specify the extracted root filesystem directory that will be copied to /rootfs directory. | None | None |
-b, --bootfiles <BOOT_FILES>
|
Specify boot files which should be copied into /boot directory. | None | Default boot files: For Zynq-7000 devices: BOOT.BIN, uImage, boot.scr. For Zynq UltraScale+ MPSoC: BOOT.BIN,Image, boot.scr For Versal ACAP: BOOT.BIN, Image, boot.scr |
-e, --extra-bootfiles <EXTRA_FILES>
|
Specify extra boot files which should be copied into /boot directory. Make sure these are part of images directory. | None | None |