The petalinux-config --get-hw-description
command allows you to initialize or update a PetaLinux project with hardware-specific
information from the specified
Vivado® Design Suite
hardware project. The components affected by this process can include FSBL
configuration, U-Boot options, Linux kernel options, and the Linux device tree
configuration. This workflow should be used carefully to prevent accidental and/or
unintended changes to the hardware configuration for the PetaLinux project. The path
used with this workflow is the directory that contains the XSA file rather than the full
path to the XSA file itself. This entire option can be omitted if run from the directory
that contains the XSA file.