The following table contains details of options specific to the JTAG boot workflow.
| Option | Functional Description | Value Range | Default Value |
|---|---|---|---|
--xsdb-conn
COMMAND
|
Customised XSDB connection command to run prior to boot. This is optional. | User-specified | None |
--hw_server-url
URL
|
URL of the hw_server to connect to. This is optional. | User-specified | None |
--tcl
OUTPUTFILE
|
Log JTAG Tcl commands used for boot. This is optional. | User-specified | None |
--fpga
(1)
|
Program FPGA bitstream. This is optional. | None | If no bitstream is specified with the
--bitstream option, it uses the bitstream from
one of the following locations:
|
--bitstream
BITSTREAM
|
Specify a bitstream. This is optional. | User-specified | None |
--pmufw
PMUFW-ELF
|
PMU firmware image. This is optional and applicable for
Zynq®
UltraScale+™ MPSoC.
PMU firmware image is loaded by default, unless it is specified
otherwise. To skip loading PMU firmware, use --pmufw no. |
None | <plnx-proj-root>/images/linux/pmufw.elf |
before-connect
<CMD>
|
Extra command to run before XSDB connect command. Ensure the command is properly quoted in your shell. This is optional and can be used multiple times. | None | None |
after-connect
<CMD>
|
Extra commands to run after XSDB connect command. Ensure the command is properly quoted in your shell. This is optional and can be used multiple times. | None | None |
|
|||