Steps for Boot Images Storage Configuration - 2020.2 English - UG1144

PetaLinux Tools Documentation Reference Guide (UG1144)
Document ID
UG1144
Release Date
2020-11-24
Version
2020.2 English
  1. Change into the root directory of your PetaLinux project.
    $ cd <plnx-proj-root>
  2. Launch the top level system configuration menu. 
    $ petalinux-config
  3. Select Subsystem AUTO Hardware Settings > Advanced Bootable Images Storage Settings.
  4. In the Advanced Bootable Images Storage Settings submenu, you have the following options:

    • Select boot device as per requirement.

      • To set flash as the boot device, select primary flash.
      • To make SD card as the boot device, select primary sd.
    • U-Boot env partition settings
    • Kernel image settings (image.ub - Linux kernel, DTB, and RootFS)
    • Image storage media

      Select storage device as per the requirement.

      • To set flash as the boot device, select primary flash.
      • To make SD card as the boot device, select primary sd.
    • Image name

      The default kernel image is fitimage (image.ub).

      You can change the kernel image (Image) using this menuconfig option.

    • jffs2 RootFS image settings
    • DTB settings