Description
The open_solution target will set the
compiler in either Vitis mode or Vivado mode. This will change the default behavior of the tool
as described in the table below.
Explanation
The following table lists the default behavior of the tool for the specified flow target.
open_solution -flow_target
<vitis/vivado>
| Vivado | Vitis | |
|---|---|---|
| set_clock_uncertainty | 27% | 27% |
| config_compile -pipeline_loops | 64 | 64 |
| config_interface -m_axi_addr64 | true | true |
| config_schedule -enable_dsp_full_reg | true | true |
| config_compile -name_max_length | 255 | 255 |
| config_rtl -module_auto_prefix | true | true |
| config_export -vivado_optimization_level | 0 | 0 |
| config_export -vivado_phys_opt | none | none |
| config_rtl -register_reset_num | 0 | 3 |
| interface pragma defaults | ip mode(does not have default interface feature) | kernel mode |
| config_interface -m_axi_latency | 0 | 64 |
| config_interface -m_axi_alignment_byte_size | 0 | 64 |
| config_interface -m_axi_max_widen_bitwidth | 0 | 512 |
| config_interface -default_slave_interface | none | slave |