User Parameters - 2.1 English

Versal ACAP 600G Channelized Multirate Ethernet Subsystem (DCMAC) LogiCORE IP Product Guide (PG369)

Document ID

PG369

Release Date

2023-04-12

Version

2.1 English

The following table shows the relationship between the fields in the AMD Vivado™ IDE and the user parameters (which can be viewed in the Tcl Console).

Table 1. User Parameters
Parameter	Description	Default Value	Options
Configuration Tab
Configuration Type	DCMAC Configuration Type	Static Configuration	Static Configuration Dynamic configuration
DCMAC Operating Mode	DCMAC Operating Mode	Coupled MAC+PCS	Coupled MAC+PCS Independent MAC and PCS+FEC
DCMAC Hard IP Site	DCMAC Hard IP Site	DCMAC_X0Y0	<DCMAC Hard IP Locations for the selected Devices>
MAC²
AXIS Datapath Interface	DCMAC AXIS Datapath Interface	391 MHz up to 6 Ports	391 MHz up to 6 Ports 195MHz up to 3x100G Ports Channelized
No of Clients	DCMAC No of Clients	N/A	N/A
MAC Port0	DCMAC MAC Port0	1	1 0
MAC Port1	DCMAC MAC Port1	1	1 0
MAC Port2	DCMAC MAC Port2	1	1 0
MAC Port3	DCMAC MAC Port3	1	1 0
MAC Port4	DCMAC MAC Port4	1	1 0
MAC Port5	DCMAC MAC Port5	1	1 0
PCS and FEC¹ ²
Per Port PCS Configurations Default PCS Mode Default PCS Mode
Port 0	Port 0	400GAUI-8	400GAUI-8 400GAUI-16 200GAUI-8 200GAUI-4 100CAUI-4 100GAUI-4 100GAUI-2 Disabled
Port 1	Port 1	N/A	100CAUI-4 100GAUI-4 100GAUI-2 Disabled Note: The Port 1 options are based on Port 0 selection.
Port 2	Port 2	N/A	200GAUI-8 200GAUI-4 100CAUI-4 100GAUI-4 100GAUI-2 Disabled Note: The Port 2 options are based on Port 0 selection.
Port 3	Port 3	N/A	100CAUI-4 100GAUI-4 100GAUI-2 Disabled Note: The Port 3 options are based on Port 0 or Port 2 selections.
Port 4	Port 4	200GAUI-4	200GAUI-8 200GAUI-4 100CAUI-4 100GAUI-4 100GAUI-2 Disabled
Port 5	Port 5	N/A	100CAUI-4 100GAUI-4 100GAUI-2 Disabled Note: The Port 5 options are based on Port 4 selections.
1588v2³
IEEEE 1588v2	IEEEE 1588v2	0	0 1
Port0 1588v2 Operation Mode	Port0 1588v2 Operation Mode	No Operation	No Operation 1-step 2-step
Port1 1588v2 Operation Mode	Port1 1588v2 Operation Mode	No operation	No Operation 1-step 2-step
Port2 1588v2 Operation Mode	Port2 1588v2 Operation Mode	No operation	No Operation 1-step 2-step
Port3 1588v2 Operation Mode	Port3 1588v2 Operation Mode	No operation	No Operation 1-step 2-step
Port4 1588v2 Operation Mode	Port4 1588v2 Operation Mode	No operation	No Operation 1-step 2-step
Port5 1588v2 Operation Mode	Port5 1588v2 Operation Mode	No operation	No Operation 1-step 2-step
Port0 1588v2 Clocking Mode	Port0 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
Port1 1588v2 Clocking Mode	Port1 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
Port2 1588v2 Clocking Mode	Port2 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
Port3 1588v2 Clocking Mode	Port3 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
Port4 1588v2 Clocking Mode	Port4 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
Port5 1588v2 Clocking Mode	Port5 1588v2 Clocking Mode	Ordinary/Boundary Clock	Ordinary/Boundary Clock Transparent Clock
GT Information Tab
GT Type	GT Type	GTM	GTM GTYP
GT RefClk	GT Refclk	156.25 MHz	156.25 MHz 161.1328125 MHz 312.5 MHz 322.265625 MHz 625.0 MHz 644.53125 MHz
GT Pipeline Stages	GT Pipeline Stages	0	0 to 10
Enable Phase Aligned FIFO between DCMAC and GT	Enable Phase Aligned FIFO between DCMAC and GT	0	0 1 Note: It is deselected and greyed-out for Static Configuration and it is ticked and greyed-out for Dynamic Configuration.
This tab is visible if the DCMAC Operating Mode is set to Coupled MAC+PCS. These options are available depending on the MAC Port Selection from MAC tab selection. The IEEE 1588v2 operation mode and clocking mode options are available when IEEEE 1588v2 is enabled.