If you are customizing and generating
the core in the
Vivado IP integrator, see
the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for
detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To
check whether the values do change, see the description of the
parameter in this chapter. To view the parameter value, run the
validate_bd_design command in the Tcl
console.
To instantiate the DSTCAM IP in Vivado Design Suite using IP integrator, follow these steps:
- Open a project in the Vivado Design Environment (IDE).
- Click Create Block Design in the Flow Navigator.
- Right-click in the Diagram window, and select Add
IP from the popup menu that appears or click the + button as shown in the following figure.
- Search for
CDCAMin the search box of the window that appears, and select CDCAM.
- Double-click the instantiated IP to configure the CDCAM IP.