PTP System Timer Sub Block - 1.6 English

Versal Devices Integrated 100G Multirate Ethernet MAC Subsystem Product Guide (PG314)

Document ID
PG314
Release Date
2022-07-13
Version
1.6 English

This is the Master or the main ToD timer and is clocked by a free running clock (ts_clk). The system timer maintains time in the ToD (48-bit seconds and 30-bit nano-sec) and Continuous time/Correction Field (63-bits CF) formats.

Registers are provided to initialize the timers’ seconds and nanoseconds counter values or to read back a snap-shot of the values. A set of offset registers are provided for seconds and nanoseconds values which are added to the ToD timer value prior to being output to the port timers.

After initialization, the PTP System Timer’s internal ToD counters can be optionally synchronized to external devices by either the External ToD interface block’s output 1PPS signal, or by the software control via register operations.

A 1PPS output indicates when the sys timer’s ToD ns field rolls over from 999_999_999 ns to 1 sec. Also, the values of system timer can be read from snapshot registers. The process of transferring the system timer’s ToD counters to the port timers is configurable and can be triggered by a 1PPS pulse of the external bus, or by a write to the TOD_SW_LOAD register. When a transfer is triggered, the PTP System Timer outputs a load-pulse (synchronous to the ts_clk domain) and places the value of its internal timer on the output bus.