Booting the Evaluation Board - 1.4.1 English

Vitis AI User Guide (UG1414)

Document ID
Release Date
1.4.1 English
This example uses a ZCU102 board to illustrate how to boot a Vitis AI evaluation board. Follow these steps to boot the evaluation board.
  1. Connect the power supply (12V ~ 5A).
  2. Connect the UART debug interface to the host and other peripherals as required.
  3. Turn on the power and wait for the system to boot.
  4. Log in to the system.
  5. The system performs some configurations on the initial boot. Reboot the board for these configurations to take effect.